Cressington EM coaters
The Cressington sputter and carbon coating systems have been specifically developed for EM applications. They are all dedicated coating systems, either for sputtering or carbon evaporation to prevent any cross-contamination. All Cressington coaters comprise excellent coating quality, compact desktop systems, ease of use, direct parameter control, quick pump down, short cycle times, innovative feedback sensing and exceptional build quality. Micro to Nano is authorized distributor of the Cressington coating systems for sales, support, replacement parts and consumables. Our team has over 30 years’ experience with coating systems for SEM and EDX/WDX system.
Micro to Nano handles sales, support and service for the Cressington coating systems:

• 108 Family of desktop SEM sputter coaters
• 108 Family of desktop SEM/EDX carbon coaters
• 208HR high resolution turbo sputter coater for FESEM
• 208carbon turbo carbon coater for FESEM, TEM, EDX/WDX, EBSD, FIB & Microprobe
• MTM series of thickness monitors and controllers
• Motorised sample stages for the coating systems

Cressington-sputter-carbon-coaters-thickness-monitors-RT-RPT-stages.php

 

Micro-Tec DM402 Digital Microscope
The Micro-Tec DM402 digital microscope with a large and bright LCD viewing screen is the ideal tool for precise sample preparation, inspection, micro-assembly and education. The Micro-Tec DM402 combine a 10” screen with the image sensor, focusing tube and top illumination in a single compact unit. The large 10” high resolution LCD screen coupled to the ultra-high resolution image sensor enables detailed full colour images. The DM402 also offers photo and video capture which can be stored on a micro SD card. Top illumination is provided by integrated LED’s in the imaging tube and a twin flexible gooseneck with LEDs provides angled side illumination to enhance sample details. With a maximum distance of 16cm, larger objects or assemblies can be easily investigated. HDMI and USB outputs are provided for connecting a larger screen or projector or for connecting a computer. The Micro-Tec DM402 includes a comprehensive choice of image settings and colour settings
Micro-Tec-DM-402-digital-microscope-large-screen-high-resolution-image-sensor-top-and-side-illumination.php

 

 

 

Value-Tec CP ESD safe replaceable plastic tip tweezers
The Value-Tec CP series ESD safe replaceable plastic tip tweezers combine the advantages of the non-marring ESD safe plastic tweezers with the firm handles of stainless steel tweezers. The material used for the replaceable plastic tips is carbon fiber filled PPS (Polyphenylene Sulfide): ESD safe, highly durable material with high chemical resistance. PPS offers similar properties as PEEK and outperforms other plastic such as PVDF, PA66 and HIPS. They are available with in 8 different styles and feature:

• Anti-magnetic ESD safe precision tweezers with carbon filled PPS plastic tips
• Highly durable, rigid tips with high dimensional stability
• High chemical resistance to most mediums, solvents, ketones & halogens (not compatible with NMP)
• Temperature resistance: -40°C to + 190°C
• Resistant to UV sterilization & Hydrolysis
• Non-marring with most materials, ideal for scratch sensitive materials
• Clean room compatible

Value-Tec-CP-ESD-safe-replaceable-plastic-tip-tweezers.php

 

EM-Tec ME oil mist filters
The EM-Tec ME series oil mist filter are essential to eliminate or reduce oil mist emitted by single or dual stage rotary vacuum pumps. They can be used for pumps with a capacity ranging from 2 – 14 m3/hr. They are compatible with rotary vacuum pumps which are used for lab equipment such as SEMs, mass spectrometers, coater systems, small vacuum ovens and drying systems. They are equipped with cartridges which can be replaced as needed. For ease of connection they comprise the standard KF/NW 16 or KF/NW 25 vacuum flanges. Additionally available are the oil mist filters with ½” and 1” female G thread (BSPP). The EM-Tec ME series oil mist filters replace the previous straight MF series oil mist filters.
EM-Tec-oil-mist-filters-for-single-dual-stage-rotary-vane-vacuum-pumps.php

 

EM-Tec Top reference holder for a single metallographic mount
The EM-Tec top reference holders are now available for a single metallographic mount. They enable a completely level sample surface in X-Y direction at zero degrees tilt or at tilt angels on eucentric SEM stages. Available for metallographic mount with 25, 30 and 40 mm diameter or with 1”, 1-1/4” and 1-1/2” diameter. Made from vacuum grade aluminium.
EM-Tec-R4-reference-holder-for-four-metallographic-mounts-embeddings.php#a12003266B

 

 

EM-Tec compact multi metallographic mount holders
The EM-Tec compact multiple metallographic mount holders are designed to hold multiple metallographic mounts or embeddings in a single holder. They are equally useful holding multiple round samples with a size similar to the mounts or for holding larger cylindrical specimen stubs. The EM-Tec multiple metallographic mount holders are available for standard metallurgical mounts with metric sizes of 25, 30, and 40 diameter and SAE sizes of 1”, 1-1/4”, and 1-1/2” diameter. The samples are secured with an M4 set screw.
EM-Tec-multiple-metallographic-mount-holders.php#a12003275B

 

EM-Tec P79/H79 EBSD holder for 40mm metallographic mounts
The EM-Tec EBSD pre-tilt sample holders for 40mm metallographic mounts include a 70° pre-tilt angle to facilitate EBSD analysis. With a 70° pre-tilt angle there is no need to tilt the SEM sample stage.  Using 70° pre-tilted holders instead of tilting the SEM stage offer definite advantages:
Correct EBSD angle when loading sample and no stage drift in Z-direction
EM-Tec-EBSD-pre-tilt-sample-holders-and-sample-holder-kits.php?#a12003348B

 

EM-Tec V14 vise clamp holder with removable jaw
EM-Tec V14 small vise sample holder with removable jaw for sample up to 15mm. One fixed jaw and a removable spindle driven jaw. Capacity with moving jaw is 0-13mm. Capacity without moving jaw (sample held by spindle) is 0-15mm. This small vise is ideal for small samples and table top SEMS. Made from vacuum grade aluminium and brass spindle.
EM-Tec-compact-and-universal-vise-sample-holders.php?#a12003319B

 

EM-Tec PV18 precision vise clamp sample holder
EM-Tec PV18 precision vise sample holder for bulk samples up to 18mm and thin samples up to 24mm. One fixed jaw and a moving spindle driven jaw. This precision vise is ideal for small to medium samples and table top SEMS. The moving jaw has vertical and horizontal notches to hold needle like samples. Made from AISI 304 stainless steel. Available with standard pin and with M4 threaded hole
EM-Tec-compact-and-universal-vise-sample-holders.php?#a12003317B

 

Micro-Tec Nylon woven wire mesh
Micro-Tec nylon woven thread cloths are useful for sorting, screening, filtration, separation and immersion applications for sample preparation and laboratory applications. This polyamide (PA6) mesh is generally abrasion resistant and can be used up to 120°Celcius (compatible with boiling water). Colour is translucent white to opaque. If needed, nylon mesh can be steam, ETO or gamma sterilized.
The Micro-Tec nylon woven mesh is available in 20, 40, 50, ,80, 100, 150, 200, 250, 300, 350, 400, 450 and 500 mesh with a size of  30x30 or 100 x 100 cm.
Micro-Tec-woven-nylon-thread-mesh.php

 

Laboratory cleaning wipes
The Techspray cleaning wipes are high quality clean-room compatible cleaning wipes which are ideally suited for a microscopy lab. They are originally designed for electronic board and soldering cleaning application, but are just as practical in any microscopy lab. These lint-free wipes can be used to clean equipment, microscope, work surfaces, samples, to wick fluids or to clear up spills. They are also suitable to protect samples or used as a clean work surface for sample preparation. Current selection are IPA pre-saturated wipes, general purpose wipes, absorbent wipes and strong low-linting wipes.
Techspray-laboratory-cleaning-wipes-techspray-techclean-cleanroom.php

EM-Tec TempStick temporary mounting wax
EM-Tec TempStick 135C is a clear temporary mounting wax adhesive which can be readily removed with acetone. It is widely used for temporary mounting of semiconductor wafers for dicing and grinding. It is also used for mounting parts or samples for grinding, cutting, lapping and polishing. EM-Tec TempStick 135C is a tough, polymer based wax adhesive which exhibits high strength, high hardness and full visibility of the mounted object when cold. Excellent cutting properties providing a strong hold and edge sharpness during various abrasive operations at room temperature. It is resistant to most solvents, including water. The most effective solvent for EM-Tec TempStick 135C is acetone
EM-Tec-Tempstick-135C-and-Sticky-wax-sticks-70C-temporary-mounting-waxes.php#a15005101B

EM-Tec Sticky wax 70C mounting wax
EM-Tec Sticky Wax 70C is a yellow coloured, low temperature temporary mounting wax. Widely used for holding semiconductors, crystals, optical materials, ceramics, gemstones, glass and other samples for cutting, slicing, lapping and polishing operations. It has a moderate hardness and moderate strength with a melting point of 70°C. EM-Tec Sticky Wax 70C is more suitable for heat sensitive materials. It readily hardens at room temperature; at temperatures above 40-50°C the work piece can be re-positioned. Equivalent to Corning rubber 155 sticky wax. Chemically resistant.
EM-Tec-Tempstick-135C-and-Sticky-wax-sticks-70C-temporary-mounting-waxes.php

Micro-Tec battery operated vacuum pick-up pen
Micro-Tec B126 ESD safe battery operated vacuum pen with built-in pump with straight / bent 16 gauge needles and 4 / 6 / 10 mm rubber vacuum cups and 2 sets of straight / bent fine needles (30 and 27 gauge) for TEM grid handling. The EM-Tec B126 vacuum pen with the built-in battery operated micro vacuum pump allows for precise handling of parts and TEM grids. It is light-weight and not restricted by a vacuum hose. It operates on a standard 1.5V type AAA battery.
Micro-Tec-vacuum-pick-up-tools.php#a52001910B

Micro-Tec vacuum pick-up pen needles for TEM grid handling
The fine needles for picking TEM grids are available for use other vacuum pick op pens with a Luer-slip connection. The 30 and 27 gauge needles fit on the 400-500um wide rim which is used on most TEM grids.
Micro-Tec-vacuum-pick-up-tools.php#a52001930B

Pre-tilt SEM/FIB sample stubs
EM-Tec low profile double tiltSEM pin stubs for SEM/FIB applications. They are made from vacuum grade aluminium and available for 3 different systems:
EM-Tec low profile double pre-tilt (52°/38°) SEM pin stub Ø12.7 mm for FEI / TFS Dualbeam
EM-Tec low profile double pre-tilt (55°/35°) SEM pin stub Ø12.7 mm for Tescan FIBxSEM
EM-Tec low profile double pre-tilt (54°/36°) SEM pin stub Ø12.7 mm for Zeiss Crossbeam, short Zeiss pin
Standard-SEM-pin-stubs.php#a10002252B
Zeiss-SEM-short-pin-stubs.php#a10003254B

EM-Tec HS40V Hitachi M6 variable height extender
The EM-Tec HS40V Hitachi variable height stub extender has been introduced to allow for more precise and more extended height setting when using Hitachi compatible stage adapters. It uses the same M6 thread and locking nut as the  fixed height stub extenders. The M4 screw is threaded through the M6 stub extender, thus allowing to adjust the height between 20 and 40mm. Locking nuts for the M4 thread are included. Especially useful for applications which require a short working distance.
EM-Tec-versatile-SEM-stage-adapter-for-Hitachi-SEMs-FESEMs-FIB-FIB-SEM-systems-and-table-top-SEMs.php#a11000329B

EM-Tec 3-360 universal laboratory bench vise
sturdy EM-Tec 3-360 universal laboratory vise is an ideal tool for specimen preparation and specimen examination tasks.
The clamping width is 75 mm with a maximum clamping opening of 50 mm. Included are protective rubber vise sleeves to minimize surface damage and to handle delicate samples. The vise can be easily clamped to laboratory tables or benches with up to 60 mm thickness. Integrated protective rubber pads avoid damaging of the table top or bench top. A full 360 degrees rotation allows for optimum positioning. The 45 and 90 degrees tilting facilities enable for accurate cross cutting or angled views.
EM-Tec-3-360-universal-laboratory-vise-with-bench-clamp.php

EM-Tec CHT37 high temperature carbon filled adhesive
EM-Tec CHT37 is an unique carbon filled inorganic silicate adhesive, especially developed for high temperature applications up to 2000°C . The fine graphite flakes are fully mixed with water based silicate solution. It is a one component system without any VOC’s. EM-Tec CHT-37 is ideally suited use with heating stages used with systems such as SEM, FIB, SIMS, AUGER or XPS (ESCA). It is also most suitable for heating experiments and high vacuum applications where electrical and thermal conductivity are needed.
EM-Tec-CHT37-conductive-high-temperature-carbon-adhesive-glue-paste-cement.php

EM-Tec C30F water-based carbon paint
EM-Tec C30F is a water based conductive carbon paint with fine dispersed graphite flakes (~<1 - 2μm, max. 5um). The EM-Tec C30F carbon paint does not contain any hydro-carbon based solvents and is fully compatible with high vacuum (HV) systems and even UHV systems when dry. Due to its low viscosity, cracks and small gaps are easily filled. EM-Tec C30F shows good conductivity when dry and cured. Heating to 300°C can reduce resistivity to approx. 25 Ohm/sq. Ideal for mounting SEM specimens and making grounding paths. Samples can be easily removed afterwards due to its low mechanical strength. Good bonding properties on a wide variety of sample materials such as metals, rocks, concrete, ceramics, epoxies, wood and textilesEM-Tec C30F contains approx. 22% graphite in the solution. Available in 40 and 100 gram bottles.
EM-Tec-conductive-paints-pastes-and-cements.php#a15001130FB

EM-Tec AG45 silver paint, low VOC

EM-Tec AG45 is a conductive silver paint based on very fine silver flakes (~1um size) with a low VOC acrylic binder. Achieves excellent bonding properties on a wide variety of materials including, plastics, ceramics, glass, metals, wood, rubber, epoxies and textiles. The tough, low VOC acrylic binder reduces material loss whereas the silver flakes ensure excellent conductivity. Use when high conductivity is needed. Ideal for making grounding tracks and to bond SEM samples on sample stubs. Samples can be easily removed. This silver cement has the consistency of a paint. Dries relatively quickly, depending on thickness; reduce drying time with moderate heat up to 65°C. Can be used on flexible surfaces. Solvent is acetone/DMC, solution contains 39% silver, acrylic based binder. User friendly: does not contain toluene, xylene or MEK. EM-Tec AG45 exhibits excellent conductivity. Supplied in a 15cc glass bottle with a brush, 15 gram
EM-Tec-conductive-paints-pastes-and-cements.php#a15002147B

EM-Tec MCS X-Y series SEM magnification calibration standards
The EM-Tec MCS X-Y series calibration standards share the same calibration range and MEMS manufacturing technology as the EM-Tec MCS series magnification calibration standards. These fully featured bi-directional calibration standards offer adjacent calibration pattern in both and X and Y direction. They are ideal for magnification calibration or critical dimension measurements in table top SEM, standard SEM, FESEM, FIB, Auger, SIMS and reflected light microscope systems.
The features on the EM-Tec MCS X-Y series are made using state of the art MEMS manufacturing techniques with high contrast chromium deposited lines for the larger features and gold over chromium for the smaller features below 2.5µm. The gold deposited features ensure optimum signal to noise ratio for calibration purposes.
EM-Tec-MCS-X-Y-series-magnification-calibration-and-critical-dimensions-standards.php

EM-Tec Checkerboard Calibration Standard
The EM-Tec Checkerboard calibration standard has been developed for quick and easy magnification and image calibration of SEMs and compact SEMs. It consists of over 1.6 million Squares which form 4 stages of checkerboard patterns. The smallest checkerboard is 10 x 10 um. These smallest checkerboards then form a pattern of 100 x 100 um and these again form checkerboards of 1 x 1 mm. The 1 x 1 mm checkerboards then form a 5 x 5 mm pattern.
The smallest 1 x 1 um squares are made with 60nm thick chromium on an ultraflat conductive Boron doped <100> silicon substrate. These materials are deemed inert under normal working conditions. Imaging contrast is good for both SE and BSE imaging. The EM-Tec Checkerboard calibration sample is suitable for SEM magnification calibration in the range of 20x to 50,000x with a pitch accuracy of ± 0.1% in both X and Y direction. Also useful for checking of image distortions and the accuracy of (motorized) SEM stages.
EM-Tec-Checker-board-Calibration-standard-SEM-imaging.php

KPFM & EFM test sample
The KPFM  & EFM test sample has been specifically designed to test the performance of Kelvin Probe Force Microscopy and Electrostatic Force Microscopy. This practical test sample consists of arrays with alternating aluminium and gold lines deposited on a silicon oxide covered silicon substrate. There are 4 line array pitches: 4, 8, 20 and 40 um with gaps of 0.5-0.8um between the lines. The line height is approx. 35 nm.
KPFM-EFM-test-calibration-sample-gold-aluminium-Al-Au-lines-mounted.php

Value compact rotary vacuum pumps for laboratory applications
The Value VRI series compact and lightweight dual stage rotary vacuum pumps have been designed for a wide range of laboratory, R&D and production vacuum applications. These vacuum pumps include an integrated solenoid valve to prevent oil suck-back when the pump is switched off. The built-in forced oil lubrication pump ensures stable and reliable operation whilst maintaining high pumping speeds. Available in 3 sizes: 2, 4 and 8 m3/hr pumping speed. They offer high quality, great specifications combined with affordable pricing.
Value-VRI-series-compact-dual-stage-rotary-vane-vacuum-pumps.php

EM-Tec oil mist filters
The EM-Tec oil mist filter are useful to eliminate or reduce oil mist emitted by single or dual stage rotary vacuum pumps. They can be used for pumps with a capacity ranging from 1 – 12 m3/hr. They are compatible with rotary vacuum pumps which are used for lab equipment such as SEMs, mass spectrometers, Sputter coaters, small vacuum ovens and drying systems.  They are equipped with cartridges which can be replaced as needed. For ease of connection they comprise KF/NW 16 or KF/NW 25 standard vacuum flanges.
EM-Tec-oil-mist-filters-for-single-dual-stage-rotary-vane-vacuum-pumps.php

EM-Tec DN-KF straight through tubes
EM-Tec DN-KF vacuum hardware straight through tubes. Useful for connection oil mist filters on rotary vacuum pumps and making rigid vacuum lines. Made from vacuum grade AISI 304.
EM-Tec-KF-NW-vacuum-connection-hardware-parts-components.php#a61110019B

EM-Tec anti-vibration pads for rotary vacuum pumps
The EM-Tec anti-vibration pads for rotary vacuum pumps made from 2-layers of NBR rubber; 2mm thick solid NBR rubber attached to 12 mm thick closed cell foam rubber for optimum dampening result. These pads can be used for table-top and floor standing rotary vacuum pumps. To get optimum results, the rotary pump is to be placed on the 2mm thick solid rubber layer. They are available in two sizes:
300 x 150 x 14mm (LxWxH) for smaller vacuum pumps such as the Value VRI pumps
380 x 200 x 14mm (LxWxH) for larger rotary vacuum pumps
Value-VRI-series-compact-dual-stage-rotary-vane-vacuum-pumps.php#a64003115B

Micro-Tec foam tipped cleaning swabs
The Micro-Tec foam tipped cleaning swab consist of finest quality 100ppi (100 pores per inch) closed cell polyurethane foam which is thermally bonded to a polypropylene handle. The thermal bonding eliminates adhesive contamination, reduces contamination and increases solvent resistivity. They can be used with mild solvents for cleaning surfaces and removing particles, debris or residues from surfaces. They are available in five different shapes and forms for small or larger surface and to clean in difficult to reach areas.
Micro-Tec-PU-foam-tipped-cleaning-swabs.php

EM-Tec compact Smart-Clip metallographic mount holders
The EM-Tec compact Smart-Clip metallographic mount holders have been specifically designed for compact and table-top SEM’s and for high tilt applications. They comprise a low weight, minimal diameter and allow for very high tilt angles – close to 90 degrees. The metallographic or metallurgical mount is held by 4 copper S-Clips which clamp the side of the mount. In case of non-conductive embeddings, a grounding path can be easily made with one of the copper S-Clips.
The lightweight and thin design only adds around 2 mm to the diameter of the mount, thus allowing for high tilt w/o interfering with detectors under pole-piece of the SEM.
EM-Tec-compact-smart-clip-metallographic-mount-holders-for-SEM.php

EM-Tec Easy Tabs double sided conductive adhesive carbon tabs
The EM-Tec Easy-Tabs are made from the same material as the standard high purity carbon tabs, but handling is made easier by providing an easy to lift-off white liner tab. To use: lift the carbon Easy-Tab of the clear backing strip, press the exposed adhesive surface on the stub and then remove the white liner Easy-Tab just before mounting the sample.  The EM-Tec Easy-Tabs are available in two sizes:

• Ø12.5mm EM-Tec Easy-Tabs are compatible with the standard Ø12.7mm pin stubs
• Ø25mm EM-Tec Easy-Tabs are compatible with the standard Ø25.4mm pin stubs, Ø25mm JEOL stubs and Ø25mm Hitachi stubs

High-purity-conductive-double-sided-adhesive-carbon-tabs-and-tapes-for-SEM-and-GSR.php#a15000413B

EM-Tec high purity carbon tabs with 15mm and 32mm diameter
The popular EM-Tec carbon tabs are now available in two new sizes:

• Ø15mm carbon tabs compatible with the Hitachi Ø15mm sample stubs
• Ø32mm carbon tabs compatible with the larger Ø32mm pin stubs, Ø32mm JEOL stubs and Ø32mm Hitachi M4 stubs

High-purity-conductive-double-sided-adhesive-carbon-tabs-and-tapes-for-SEM-and-GSR.php#a15000415B

EM-Tec DN/KF adapters to BSPT thread
The EM-Tec KF/NW vacuum thread adapter to BSPT thread allows for connecting standard DN/KF vacuum hardware on installed vacuum line, pipes, fittings, vacuum gauges and systems with BSPT (British Standard Pipe Tapered) thread. Available with male and female thread.
EM-Tec-KF-NW-stainless-steel-adapters-to-BSPT-NPT-and-ISO-metric-fine-thread.php#a61110061B

EM-Tec DN/KF adapters to Metric ISO thread
The EM-Tec KF/NW vacuum thread adapter to M20 and M14 thread allows for connecting standard DN/KF vacuum hardware on vacuum gauges and systems with fine metric ISO M20 and M14 thread with a pitch of 1.5mm thread. Available with male and female thread.
EM-Tec-KF-NW-stainless-steel-adapters-to-BSPT-NPT-and-ISO-metric-fine-thread.php#a61110061B

Micro-Tec Vacuum chamber – degassing chamber
The Micro-Tec VC190 stainless steel vacuum chamber has been designed for degassing cold metallographic embeddings, epoxy resins, urethane compounds, silicone rubber and/or extracting hydrocarbons from sample. With its compact size it is ideal for metallography, microscopy, R&D labs and/or small production facilities. The pumping and venting lines are integrated in the clear transparent lid together with the vacuum gauge. Both the pumping and venting line include a ball valve for quick opening and closing. The venting line also includes a filter muffler for noise reduction and clean venting.
Cold embedding resins, epoxy resin or silicon rubber mixtures should be degassed to remove air bubbles from the material by pumping and venting. The transparent acrylic lid allows for easy observation of the degassing process.
Micro-Tec-vacuum-chamber-stainless-steel-for-degassing-epoxy-resins-silicone-rubber-urethane-extracting-hydrocarbons.php

Micro-Tec additional membrane boxes
The range of Micro-Tec membrane boxes have been expanded with three more types of Membranes boxes: the small Micro-Tec M12,  the larger Micro-Tec M55 (130x130x50mm) and the very large Micro-Tec M90 (255x205x100mm) membrane boxes.
Micro-Tec-clear-plastic-membrane-boxes-for-storage-and-display.php

EM-Tec Zirconium disc sputter target
The extensive range of EM-Tec disc sputter targets has been expanded with a high purity Zirconium sputter target. It is available with the popular diameters of 57 and 54mm and a thickness of 0.2mm.
EM-Tec-Sputter-Targets-for-Sputter-Coaters.php#a7057DISKB

EM-Tec small storage box for Hitachi Ø 15mm stubs
Micro to Nano introduces the small EM-Tec SH4 storage box for 4 x Ø15mm Hitachi stubs. It consists of a LDPE insert in a styrene box with a clear top and black base. Ideal for storing Hitachi stubs for shipping, storage and archiving.
EM-Tec-Hitachi-M4-stub-storage-boxes.php#a13094004B

 EM-Tec Save-Storr 2B in black ABS
The EM-Tec Save-Storr 2B is now available with a black ABS box. Ideal for storing light sensitive samples under inert gas.  Its volume is 1.75 ltrs (same as the clear EM-Tec Save Storr 2).
EM-Tec-Save-Storr-inert-gas-protect-sample-storage-container.php#a13001060B

EM-Tec J7S multi stub holder for 7 x Ø9.5 (10)mm JEOL stubs
EM-Tec J7S multi stub holder can hold up to 7 JEOL Ø9.5 (10) mm stubs. The cavities are 10mm deep. In the center of the cavity is a small hole to push up and/or to adjust the height of the stubs. Available with M4 threaded hole and standard pin. Made from vacuum grade aluminium and stainless-steel screws.
EM-Tec-multiple-stub-holders-for-JEOL-cylinder-stubs.php#a12003307B

EM-Tec V22L low profile compact vise sample holder 0-22mm
EM-Tec V22L compact vise sample holder for sample sizes up from 0-22mm with a pin. One fixed jaw and a spindle driven moving jaw. Jaw height is 3mm, clamping width is 25mm. Cost-effective compact vise which can be used in both standard SEMs and table-top SEMs. Made from vacuum grade aluminium, brass spindle, and stainless-steel screws.
EM-Tec-compact-and-universal-vise-sample-holders.php#a12002200B

EM-Tec FS26 & FS51 four-sided clamping SEM holders
The EM-Tec FS series four sided bulk holders are designed to securely hold awkwardly shaped and bulk samples. These unique shaped square sample holders included four brackets with multiple screws in each bracket. This allows for mounting and securing the sample in the desired position. The height of the brackets is 8mm. They are made from vacuum grade aluminium The EM-Tec four-sided bulk SEM sample holders are available in 2 practical sizes: EM-Tec FS26 with a capacity of 26x26mm and EM-Tec FS51 with a capacity of 51x51mm.
The EM-Tec FS series four-sided clamping sample holders are available with pin stub, an M4 threaded hole and the Ø14mm JEOL stub to fit virtually all types of SEMs. They also fit on our unique selection of EM-Tec SEM stage adapters.
EM-Tec-FS-series-four-sided-bulk-clamping-SEM-sample-holders.php

EM-Tec JV70L Low profile JEOL stage adapter
The EM-Tec JV70L JEOL stage adapter has a total height of only 8.5mm which allows the use of larger sample holders or samples on the JEOL SEMs. Compatible with the EM-Tec range of sample holders and can be used on all modern JEOL SEMs and FESEMs such as the iT300/500/800, F100 and the 7xxx series.
EM-Tec-versatile-SEM-stage-adapters-for-JEOL-SEMs-FESEMS-FIB-SEM-systems.php#a11000575B

EM-Tec JV70R JEOL stage adapter with Ø32mm insert
The EM-JV70R JEOL stage adapter with the standard height of 14.5mm includes an Ø32mm insert which allows to rotate the sample holders after attaching it to the insert. Alternatively, the EM-Tec JV70R can be fitted with optional multi stub holders for pin stubs or JEOL Ø 12.2 and Ø 9.5mm stubs. It can be used on all JEOL SEMs and FESEMs such as the iT300/500/800, F100 and the 7xxx series.
EM-Tec-versatile-SEM-stage-adapters-for-JEOL-SEMs-FESEMS-FIB-SEM-systems.php#a11000576B

EM-Tec JV41 stage adapter for JEOL Neoscope JCM7000 table-top SEM
The EM-Tec JV41 stage adapter enables the use of the large selection of EM-Tec SEM sample holders on the JEOL Neoscope JCM7000 table-top SEM.  It is has a variable height adjustment between 15 and 49mm. This will make the JEOL Neoscope more versatile and allows the use of high/thick samples.
EM-Tec-versatile-SEM-stage-adapters-for-JEOL-SEMs-FESEMS-FIB-SEM-systems.php#a11000541B

Micro-Tec DB5 reusable bulk desiccant with orange indicating silica gel
The Micro-Tec DB5 is an indicating type of desiccant which turns green when saturated. It is now also available in bulk packs of 500gram. Useful for larger vacuum desiccators.
Micro-Tec-orange-indicating-reusable-desiccant-sorbent-dehydration-box.php?#a13078050B

EM-Tec TG6 TEM grid holders for up to 6 TEM grids
EM-Tec TG6 pin stub based TEM grid for up to six TEM grids. Numbered positions with machined pockets and side grooves for loading/unloading the TEM grids. The TEM grids are clamped down by the top plate and a central brass screw. Through hole size is Ø2.1mm with a 60° side angle on top and base to reduce electron and X-ray scattering interference from the holder. Available in aluminium and copper. Overall size is Ø25x3.2mm with a 15mm long standard 3.2mm pin. The longer pin creates a distance from the stage adapter to reduce electron and X-ray signals from the SEM stage. Additionally available with stub adapters for Hitachi M4 thread and JEOL Ø 12.2 and Ø 25mm stubs.
EM-Tec-TEM-grid-holders-and-STEM-imaging-holders.php?#a12002276B

EM-Tec KF/NW Ball valves
The EM-Tec KF/NW stainless steel ball valves are available as in-line and 3-way ball valves. They are made from AISI 304L stainless steel and offer a quick and easy way to close / open / select vacuum lines. The 3-way ball valves are especially useful for connecting 2 systems on a single vacuum pump which is cost-effective and space saving. The EM-Tec KF/NW 3-way ball valves are of the L-type ball valve, which enables to either pump the right or the right side of the 3-way ball valve. The ball valves are designed for use in fine vacuum applications to a level of 1 x 10-4 mbar such as backing lines on rotary, scroll and diaphragm vacuum pumps. Use temperature range is -20 to 180 °C due to the PTFE seals.
EM-Tec-KF-NW-stainless-steel-in-line-and-3-way-ball-valves.php

EM-Tec KF/NW stainless steel vacuum bellows
The EM-Tec stainless vacuum bellows full metal flexible vacuum connection hoses for vacuum and high vacuum applications. The flexible metal bellows are made from 304L stainless steel, they don’t out-gas and exhibit very low leak rates. They also reduce pump vibrations towards vacuum systems. Ideal to connect pumps and systems to fixed vacuum lines; the flexible metal bellows allow for movement and misalignment on fixed vacuum piping. Compression and expansion rates are typically 5-10% of the flexible length. The stainless-steel bellows offer a superior alternative to thick wall PVC vacuum hoses.
EM-Tec-KF-NW-flexible-bellows-stainless-steel-metal-high-vacuum.php

Micro-Tec DS-150 low speed precision diamond saw
The Micro-Tec DS-150 low speed precision diamond saw is a valuable tool for cutting a wide variety of materials and composites. This precision saw is useful for cutting samples, embeddings and for making cross sections. The Micro-Tec DS-150 low speed precision diamond saw enables precise and deformation-free cutting of hard and brittle materials, fragile materials, soft materials and composite materials with reduced or low surface deformation. The wide selection of sample holders enables cutting virtually any sample shape. Together with multi-axis movements of the cutting arm holder precise thickness of the sample and cutting angle can be selected with great precision.
Micro-Tec-DS-150-low-speed-precision-diamond-saw-cutting-cross-sectioning.php

EM-Tec CV2 large centering vise SEM sample holders
The EM-Tec CV2 large centering vise is a completely re-designed version of the previous centering vise. The robust EM-Tec CV2 centering vise is ideal for large and heavy SEM samples. It offers lower weight, larger clamping capacity and more versatility for oddly shaped samples compared to the previous version.
EM-Tec-CV1-large-centering-vise-SEM-sample-holder.php

Rapid-Core biopsy & sampling punch with plunger system
The Rapid-Core biopsy & sampling punch with plunger system is high quality coring tool, designed to cut, core, punch and retrieve smaller samples of thin and soft materials such as paper, plastics, films, gels, tissue, fabrics, cloth, tapes leaves, paint and coatings. It is the ideal tool to cut smaller samples from larger sheets or films of softer materials for subsequent microscopy investigations and SEM/EDS analysis. There are 15 different coring diameters available with cutting diameters ranging from 0.35 to 8.0 mm and a coring depth of 5mm. The cutting tip is retractable for protecting and safety, the plunger system mechanism ensures clean and secure removal and/or transfer of coring samples.
Rapid-Core-sampling-punches-retractable-with-plunger-system.php

EM-Tec Pioloform only support films for TEM
The EM-Tec P- range Pioloform only TEM support films are suitable for TEM applications up to 120 kV. Pioloform is a polymer type film and is generally hydrophilic and allows for good dispersion and good deposition of particles on the surface of the film. Pioloform is sometimes preferred over Formvar due to its higher mechanical and thermal stability and lower density, which can help reduce electron scattering and results in better transparency. The Pioloform support films are very elastic, comprise a thickness of 5-7nm, are solid, transparent and largely resistant to voltage of 120kV. The Pioloform only TEM support films are available on 50, 75, 100, 150, 200, 300, 400 mesh and larger slotted copper, nickel and gold TEM grids.
EM-Tec-pioloform-only-support-films-on-TEM-grids.php

 

Micro-Tec diaphragm vacuum pumps
The Micro-Tec oil-less and dry diaphragm vacuum pumps provide a clean vacuum and don’t emit any oil vapours. These pumps are maintenance free and don’t require regular vacuum oil change or change of oil mist filters. They are ideally suited to evacuate vacuum containers, desiccators or small ovens in a laboratory environment. The range of oil-free Micro-Tec diaphragm pumps has been extended with 2 additional pumps:

• Single stage with 30L/min pumping speed and max. vacuum level of 150 mbar
• Dual stage with 60L/min pumping speed and max. vacuum level of 50 mbar.

Micro-Tec-diaphragm-vacuum-pump-dry-oil-less-clean.php

 

EM-Tec EDX-Checker S-7 for SEM/EDX systems and BSE detectors
The EM-Tec EDX-Checker S-7 is a cost-efficient tool for quick and easy checking of the performance and calibration of EDX systems. Supplied as a polished pin stub with optional adapters for JEOL and Hitachi SEMs. The EM-Tec EDX-Checker S-7 has been introduced as the entry-level EDX-Checker for standard EDX performance and calibration check. The EDX-Checker S-8 (with additional AISI316L) and the EDX-Checker LE-10  (with additional AISI316L and BN) offer more elaborate performance checks.
EM-Tec-EDX-Checker-for-EDS-Systems-X-ray-mapping-BSE-Detector.php

 

EM-Tec smooth side wall Molybdenum lift-out grid with 5 posts
The selection of the EM-Tec molybdenum smooth side wall FIB lift-out grids has been expanded with a Mo grid with 5 posts in a narrow spread. The 5 post Mo lift-out grid offers greater productivity.
EM-Tec-FIB-lift-out-grids.php

 

Blue transparent PVC surface protection tape
The single sided blue transparent PVC surface protection tape consists of a PVC film with an acrylic adhesive. The tape is self wound without a liner. The low adhesive strength of the acrylic based adhesive makes tape removal easy and leaves clean surfaces without residue. Ideal for taping notes on instruments and sealing of sample boxes. Available in widths from 10 to 100mm with a length of 100m. Clean 76mm diameter plastic core.
Blue-PVC-surface-protection-tape-low-tack-no-residue.php

 

PTFE coated fiberglass fabric high temperature tape
This single sided tape consists of a brown fiberglass fabric backing impregnated with PTFE (polytetrafluorethylene) and coated with a high temperature, pressure sensitive silicone adhesive. This creates a high strength, corrosion resistant, high temperature, low friction tape with unique properties. Total thickness of this robust tape is 0.18mm. Although this tape has been designed for high temperature applications, its unique design with high strength, high electrical insulation and low friction properties, this tape has a wide range of applications: release tape on heat sealers, low friction lining of guiding rails, tape for heating strips on high vacuum systems, release lining for molds, barrier tape and packaging tape.
Available in widths from 10 to 50mm with a length of 10m. Clean 32mm diameter plastic core.
PTFE-coated-fiberglass-cloth-fabric-high-temperature-tape-silicone-adhesive.php

 

Micro-Tec CCG8 conductive carbon grease
Micro-Tec CCG8 conductive carbon vacuum grease which is a thinner grease and designed for general purpose ESD safe applications.  Provides excellent lubrication, reduces mechanical wear and protects against corrosion. The consistency is a thin paste with high contents of silicon grease with carbon black for conductivity. Supplied in an 80 gram Tube.
Micro-Tec-conductive-silver-vacuum-grease.php

 

K-Kit wet cell with additional channels and membranes
The K-Kit wet cell for liquid samples is now available with more choice on channel height and with a choice of membrane thickness. Available channel heights are 0.1, 0.2, 0.5, 1, 2 and 5µm. The membranes thickness is either 30 or 100nm. 30nm for SEM and high-resolution applications. The more robust 100nm is for TEM applications.
K-kit-wet-cell-liquid-TEM-sample-holder-with-preparation-tools.php

K-Kit wet cell folding grid holder for TEM grid holders
The K-kit folding grid is a specially designed, optional, and reusable folding grid to hold the K-kit wet cell without the need to glue the K-kit to an aperture grid. When closed, the k-kit folding grid a has a nominal thickness of 70 um. It would fit in most TEM grid holders. Supplied in a gel box with 10 folding grids.
K-kit-wet-cell-liquid-TEM-sample-holder-with-preparation-tools.php#a23730072B

EM-Tec SB23 and SB11 SEM pin stub storage boxesn
Zwei neue Aufbewahrungsboxen für Stiftprobenteller: EM-Tec SB23 für 23 x Standard Ø 12,7 mm Stiftprobenteller oder für größere Stiftprobenteller bis 63 mm Durchmesser. Die EM-Tec SB11 ist konzipiert für 11 Standard Stiftprobenteller. Beide Aufbewahrungsboxen sind hergestellt aus durchsichtiges Styrol mit einer weißen LDPE Einlage. Die Einlage kann aus der Box genommen werden um Proben einzustecken oder zu entfernen. Die EM-Tec SB23 steht auch zu Verfügung mit einem superstarken, durchsichtigen Polykarbonat Box. Diese robuste Box ist ideal für Transport, Versand, raue Umgebungen und im Feld.
EM-Tec-pin-stub-storage-boxes.php#a13090024B

EM-Tec SH11 and SH12 Hitachi stub storage boxes
The EM-Tec SH11 storage box for Hitachi stubs with M4 threaded holes has a capacity to store 11 of the Ø15mm stubs or 8 of the Ø25mm stubs. The SH11 storage box is made from clear polystyrene with an LDPE white insert. The insert can be lifted out of the box for easy access. The EM-Tec SH11 is also available with a super strong polycarbonate box which will withstand rough handling conditions. The EM-Tec SH12 is a compact storage box for 12 of the Hitachi Ø15mm stubs.
EM-Tec-Hitachi-M4-stub-storage-boxes.php#a13094011B

EM-Tec SC12 JEOL/pin stub storage boxes
The EM-Tec SC12 storage box is made for either 12 of the JEOL Ø9.5mm cylinder stubs or 12 of the Ø12.2mm JEOL cylinder stubs or 12 of the standard Ø12.7mm pin stubs. The EM-Tec SC12 storage box is made from clear polystyrene with an LDPE white insert. The insert can be lifted out of the box for easy access.
EM-Tec-JEOL-cylinder-stub-storage-boxes.php#a13095012B

EM-Tec EDX-Checker for SEM/EDX systems and BSE detectors
The EM-Tec EDX-Checker is a cost-efficient tool for quick and easy checking of the performance and calibration of EDX systems. Supplied as a polished pin stub with optional adapters for JEOL and Hitachi SEMs. It is available in two versions:
• EDX-Checker S8 with C, PTFE, Mn, Co, and Al/Cu as reference materials, AISI 316L for quantitative analysis check and Ni grids with 400 plus 1000 mesh for quick magnification calibration and mapping check. Ideally suited for tabletop SEMs with EDS.
• EDX-Checker LE-10 with BN, C, PTFE, Mn, Co, and Al/Cu as reference materials, AISI 316L for quantitative analysis check and a 400mesh Nickel grid for quick magnification calibration and mapping check. Optimised for low element performance check.
EM-Tec-EDX-Checker-for-EDS-Systems-X-ray-mapping-BSE-Detector.php

EM-Tec pin 12.7mm stubs no groove
The standard Ø12.7mm pin stub is now available with no groove. The no groove pin stub allows for marking or engraving at the side which is always visible and does not interfere with the sample.
Standard-SEM-pin-stubs.php#a10002011B

EM-Tec Preparation stands
EM-Tec PS22 and PS23 are solid, round, and stabile EM-Tec PS22 preparation station for all types and sizes of SEM pin stubs, Hitachi 15mm cylinder stubs and JEOL 9.5 + 12.2mm cylinder stubs. Holds the stubs in numbered locations to avoid confusion when preparing multiple stubs. The EM-Tec PS22 holds up to 11 standard Ø12.7mm pin stubs or larger pin stubs up to Ø 100mm or 11 Hitachi Ø 15mm stubs. The EM-Tec PS23 holds 12 of the Ø 9.5 or Ø 12.2mm JEOL stubs. Made from clean room compatible solid aluminium. Overall size is Ø80 x 20mm.
EM-Tec-preparation-pods-and-SEM-stub-stands.php?#a15007514B

EM-Tec DC82 dust cover
Dust cover with tray made from clear polystyrene and blue ABS. Effective protection against dust for SEM samples, parts, and sample holders. Internal diameter is 82mm with a usable height of 40mm. Overall size is Ø 105 x 75 mm. EM-Tec-preparation-pods-and-SEM-stub-stands.php?#a15007519B

EM-Tec B16 small bulk holder
The EM-Tec B16 bulk sample holder is a compact holder for samples up the 16mm. Ideal for cross- sections, small samples. Can be used in standard SEMs and tabletop SEMs. The EM-Tec B16 is the smallest holder in the range of bulk holders. Available with standard pin, M4 threaded hole and JEOL 14mm stub.
EM-Tec-bulk-SEM-sample-holders.php?#a12003316B

EM-Tec PS23 dual slot vise 2 x 2.5mm
EM-Tec PS23 pin stub dual slot vise with two slots of 2.5 mm wide. Ideal for holding thin wafer pieces samples for cross section imaging. Samples are clamped by set screws. Holder size w/o pin is Ø25x7.2mm.
EM-Tec-SEM-stub-based-compact-sample-holders.php?#a10002223B

EM-Tec PS27 dual slot vise 2 x 7mm
EM-Tec PS27 pin stub dual slot vise with two slots of 7 mm wide. Ideal for holding thin wafer pieces samples for cross section imaging or other thin samples. Samples are clamped by set screws. Holder size w/o pin is Ø25x7.2mm.
EM-Tec-SEM-stub-based-compact-sample-holders.php?#a10002227B

Value-Tec brass tweezers
The Value-Tec brass tweezers are made tweezers from soft metal and fully non-magnetic brass. Brass exhibits corrosion resistance to salts, low concentrate acids, solvents, oils, and greases. Brass is a soft material, antibacterial and exhibits high conductivity. Ideal for non-marring applications and handling brass or copper parts. Sold as a set of 5 tweezers.
Value-Tec-brass-tweezers.php

Value-Tec titanium tweezers
The cost-efficient Value-Tec titanium tweezers are precision made tweezers with smooth edges and a matte finish to reduce glare. They are made from tough, strong, and lightweight titanium Grade 1. Titanium exhibits good corrosion resistance to salts, low concentrate acids, solvents, oils, and greases. Titanium is fully non-magnetic, lightweight, strong bio-compatible and temperature resistant. Available in the popular styles 1, 3, 4, 5, 7 and SS.
Value-Tec-fine-titanium-tweezers.php

Micro-Tec polycarbonate desiccators with vacuum gauge
The Micro-Tec lightweight, polycarbonate desiccators are ideally suited to store samples in a clean and moisture free environment. The shatterproof polycarbonate desiccators are much lighter and safer than glass desiccators.
They include an integrated vacuum gauge in the lid and venting/pumping valves both in the base and in the lid. The soft neoprene O-ring provides a vacuum seal which does not require grease. The Micro-Tec polycarbonate vacuum desiccators can hold a vacuum level of 150 mbar for over 3 weeks.  The Micro-Tec polycarbonate desiccators are available in two sizes: 150mm and 250mm diameter.
These Polycarbonate desiccators are also ideal for degassing of epoxies or resins; the two valves allow for precise adjusting of the vacuum level. Both the pumping speed and the venting speed can be controlled separately.
Micro-Tec-clear-shatterproof-polycarbonate-PC-vacuum-desiccators.php

Micro-Tec diaphragm vacuum pump
The Micro-Tec MP850S diaphragm pump is ideally suited to pump vacuum container or desiccators in a laboratory environment. The single stage Micro-Tec MP850S can pump a vacuum down to 150mbar with a pumping speed of 1.8 m3/hr. This oil-less diaphragm pump provides a clean vacuum and emits no oil vapours.
An additional feature is the compressor function with a pressure up to 2.1 Bar. It is designed for continuous use with a moderate noise level. The soft rubber feet provide further sound insulation. It features two pressure gauges, hose barbs and valves. Additional applications are degassing of epoxy resins or silicones, drying and filtration.
Micro-Tec-diaphragm-vacuum-pump-dry-oil-less-clean.php

Micro-Tec PTFE beakers
The robust Micro-Tec PTFE beakers are made from solid, non-porous PTFE with a smooth finish and a flat base.  They are virtually unbreakable and cryo compatible. They can withstand temperatures up to 250 C. The Micro-Tec PTFE beakers are available in sizes ranging from 30 to 1000 ml.
Micro-Tec-PTFE-beakers-spout-robust-inert-unbreakable.php

FlowView Aquarius liquid sample chamber for SEM
The FlowVIew Aquarius liquid sample chamber is a powerful tool to investigate liquid samples in the SEM. It is primarily developed for materials analysis and particle analysis applications. The three component sample chamber is easy to use with specially developed preparation tools and resembles an SEM specimen stub when prepared for use in the SEM. The FlowView Aquarius liquid chambers with M4 threaded sample stubs are directly compatible with Hitachi SEMs and with SEMS using pin stubs by using the supplied pins tub adapter. For first time users we advise to purchase the FlowView starter kit and purchase more liquid sample chambers when needed. The silicon nitride window is held in a silicon frame. These are both relatively inert materials and are compatible with water, solvents, oils, fuels, mild acids and mild alkalis. Application examples are:

• Nano-particle research

• Quality control of solutions and suspensions
• X-ray analysis of nano-particles
• Direct SEM observation of liquid samples w/o drying
• Analysis of particle inclusions in oils, greases, fuels, or pastes

Flowview-Aqaurius-liquid-sample-chamber-for-SEM.php

EM-Tec Flextube PVC wire-reinforced vacuum hoses
The EM-Tec Flextube is a clear, wire reinforced thick wall PVC vacuum for making flexible and custom vacuum hoses. Made from corrosion resistant clear thick wall PVC with embedded zinc plated spring steel wire. This flexible yet strong hose allows for relatively sharp bends and will not collapse under vacuum. Outside and inside of the PVC vacuum hoses are smooth. Current choice includes 16mm and 25mm ID PVC vacuum hoses. Available with lengths up to 10 meters.
EM-Tec-silicone-clear-wire-reinforced-PVC-vacuum-hose-KF-NW-adapters.php

EM-Tec DN-KF vacuum parts: 90 degree Elbows, Equal T-Connectors and Manual Vent Valves
The additionally available DN-KF vacuum components are 90 degrees elbows, equal T-connectors and manual vent valves. They are available in the standard DN16KF and DN25KF sizes.

EM-Tec-KF-NW-vacuum-connection-hardware-parts-components.php

EM-Tec R12 top reference holder for 2 x Ø25mm / Ø1 inch metallographic mounts
The EM-Tec R12 top reference holder consist of two parts: top and base. The maximum sample height is 20mm. The mounts are secured with screws and can be pushed against the reference lips with screws in the base.  Pushing from the base allows for small angle adjustment if the polished surfaces of mounts are not perfectly perpendicular to the sides. The top of the EM-Tec R12 can be used without the base on the EM-Tec stage adapters with an M4 screw.
EM-Tec-R4-reference-holder-for-four-metallographic-mounts-embeddings.php

EM-Tec Iris scissors
The EM-Tec Iris scissors are made from a select grade hardened AISI 410 stainless steel. These compact Iris scissors comprise small sharp straight points and are ideal for precision preparation tasks.  They are available with lengths of 9, 10, 11 and 12 cm.
EM-Tec-microscopy-preparation-laboratory-dissection-scissors.php#a52004369B

Micro-Tec diced Ø4”/100mm wafer with 7.5x7.5mm silicon chips
Silicon chips are now also available in the size of 7.5x7.5mm in the form of a Ø4” / 100mm diced wafer. The available sizes for the silicon chips are: 5x5mm, 7.5x7.5mm and 10x10mm.
Silicon-wafers-substrates-and-sample-supports.php#a10008147B

Micro-Tec SH6 holder for single edge cutting blades
The Micro-Tec SH6 holder for single edge cutting blades has been designed to hold single edge cutting blades with a width of 39mm. It has a large wooden handle and allows to use the blades for cutting or scraping applications. The holder clamps the blade and allows for safer handling of the single edge cutting blades.
Micro-Tec-single-edge-cutting-blades.php#a52004162B

EM-Tec smooth side wall Molybdenum FIB lift-out grids with 2, 3 and 4 post

The unique EM- Tec smooth side wall Molybdenum FIB lift-out grids are now available with 2, 3 and 4 posts. The smooth side wall virtually eliminates FIB smoothing saving valuable FIB processing time. These Mo FIB lift-out grids include unique indicating markers for each.
EM-Tec-FIB-lift-out-grids.php#a25020203B

EM-Tec Disc Sputter Targets Ø62mm for the Hitachi MC 1000 Sputter Coater

EM-Tec disc sputter targets are now available for the Hitachi MC 1000 sputter which uses Ø62mm disc targets. Available are the most popular precious metal targets: Gold, Gold/Palladium, Platinum, Platinum/Palladium and Palladium. Other targets materials can be supplied on request.
EM-Tec-Sputter-Targets-for-Sputter-Coaters.php#a7062DISKB

EM-Storr 110EL tall vacuum storage container for large sample Ø110x93mm

The latest addition to the growing EM-Storr product range is the EM-Storr 110EL. This large EM-Stor container has been designed to store either larger or bulky sample or multiple small samples. To facilitate storages of multiple SEM stubs or metallographic samples an insert with perforated round shelves is available as an option.
Made from solid vacuum grade aluminium with a 15mm thick clear hardened glass lid.
EM-Tec-Em-Storr-vacuum-EM-sample-storage-transport-shipping-container.php#a13001057B

 

EM-Tec CGB-4A solid aluminium cryo grid box for 4 TEM grids
EM-Tec-TEM-grid-storage-boxes.php#a28001009B">The EM-Tec CGB-4A aluminium cryo grid box is a round aluminium grid box with 4 diamond shaped positions, an index notch and an aluminium lid. The lid is held in place with a stainless-steel Phillips pan head screw. The robust aluminum construction is fully cryo compatible and easy to clean with solvents or low power plasma. The EM-Tec CGB-4A is compatible with the TFS / FEI Vitrobot, Gatan CP3 / 3500 / 626 and Leica EM GP cryo systems.
EM-Tec-TEM-grid-storage-boxes.php#a28001009B

EM-Tec CG-1 aluminium grid box for a single or calibration grid
The EM-Tec CG-1 aluminium grid box has been designed to store a calibration grid or a single TEM grid. All components are made from durable and anti-static aluminium. The robust aluminium body and lid can be easily cleaned and prevent contamination caused by hydrocarbons originating from plastics. The aluminium thumb screw allows for easy opening and secure closing of the lid. Can be easily stored in a clean vacuum chamber.
EM-Tec-TEM-grid-storage-boxes.php#a28001001B

EM-Tec FA-4 FIB lift-out grid storage boxes
The EM-Tec FA-4 aluminium FIB lift-out grid box has been especially designed for storing and transporting valuable FIB lift-out grids. The diamond shaped cavity is only 1.8mm deep to accommodate the valuable FIB lift out grids or half grids. The aluminium thumb screw allows for easy opening and secure closing of the lid. Available with 4 different colours thumb screw to identify different samples. Dimensions are Ø14 x 11mm.
EM-Tec-TEM-grid-storage-boxes.php#a28002004B

EM-Tec AISI 316L stainless steel pin stubs
12.7 and 25.4mm pin stubs are now available in 316L non-magnetic stainless steel. The stainless-steel pin stubs can be used where aluminium or copper is not desirable or when reduced heat conductivity is required. The AISI 316L stainless steel pins tubs can be easily cleaned and re-used many times over. Preferable for UHV applications and can be easily polished.
Standard-SEM-pin-stubs.php#a10002016B

Nano-Tec 6mm AFM discs
6mm AFM discs have been added to the selection of the Nano-Tec stainless steel AFM discs
Nano-Tec-Metal-Specimen-Support-Discs-for-AFM-and-SPM.php#a4010SSB

Micro-Tec sticky gel carrier boxes
The Micro-Tec sticky gel carrier boxes are designed to transport, protect, and store sensitive samples, parts and devices. The boxes contain a layer of silicone based crossed linked gel in the base of the box. They are intended for flat samples with a smooth surface such as silicon substrate chips, semiconductor devices, MEMS, optoelectronics, optics, etc. Samples with a smooth surface easily adhere to the sticky gel.  Additionally, available with an antistatic black ABS base for ESD sensitive parts. Available in 4 sizes:

• Micro-Tec GB22 clear/black gel carrier box, inside dimensions 47x47x5mm
• Micro-Tec GB32 clear/black gel carrier box, inside dimensions 60x40x10mm
• Micro-Tec GB33 clear/black gel carrier box, inside dimensions 75x75x7mm
• Micro-Tec GB44 clear/black gel carrier box, inside dimensions 105x105x8mm

 Micro-Tec-sticky-gel-carrier-boxes-standard-anti-static-black-clear-grid-print.php


EM-Tec F90 SEM filter holder for 90mm filter discs
The EM-Tec F90 filter disc holder for the large 90mm diameter filters has been added.
EM-Tec-filter-disc-holders-for-SEM-analysis.php#a12000390B

Hysol 1C-LV reduced viscosity vacuum compatible Epoxy
Hysol 1C high vacuum epoxy glue and sealant is ideal for sealing leaks on vacuum systems, bonding vacuum components, repair of vacuum components and to seal electrical feedthroughs on high vacuum systems. A reduced viscosity is now available as a 50 ml 2-component cartridge.
Loctite-Hysol-1C-Torr-Seal-High-Vacuum-Epoxy-Resin-Sealant.php#a64002004B

Dispenser gun for 50ml Hysol 1C-LV cartridge with 2:1 mixing ratio
Dispenser gun, compatible with the 2-component 50ml Hysol 1C-LV epoxy cartridges.
Supports the 2:1 (1: 1/2 ) mixing cartridges.
Loctite-Hysol-1C-Torr-Seal-High-Vacuum-Epoxy-Resin-Sealant.php#a64002005B

EM-Tec metal and carbon powder

The EM-Tec metal powders are primarily intended for mixing with resins, epoxies, cyanoacrylate glue and other embedding materials to make conductive embeddings.  Conductive embedding is advantageous for SEM/FIB applications since it eliminates the need for conductive coatings and allows for analysing edges without charging effects. Conductive carbon powder is compatible with the density of most resins, copper is more suitable for viscous and fast setting resins. 
EM-Tec-metal-carbon-graphite-powder-for-conductive-resin-epoxy-glue-embedding-mounting.php

EM-Tec high purity metal substrate discs
The EM-Tec high purity metal SEM substrate discs are intended as substrate discs for X-ray analysis with EDS / WDS or for particle analysis with the SEM.  Especially useful when the standard aluminium or copper alloy stubs generate overlapping background peaks. With the right metal substrate, trace elements in particles can be enhanced through X-ray fluorescence. The EM-Tec high purity metals discs are available in 12 and 25mm diameter and are compatible with the popular Ø12.5mm and Ø25mm diameter SEM stubs. They can be attached to the SEM stubs with carbon tabs, carbon paint or silver paint.
EM-Tec-high-purity-metal-SEM-substrate-discs-X-Ray-particle-analysis.php

 

Lead and Magnesium Sputter Targets
Lead and magnesium sputter targets have been to the extensive selection of the EM-Tec sputter targets. They are available in 57 and 54 mm diameter.
EM-Tec-Sputter-Targets-for-Sputter-Coaters.php

Value-Tec plastic tweezers

The Value-Tec plastic tweezers intended for handling scratch sensitive or brittle materials, magnetic materials. The cost-efficient Value-Tec plastic tweezers offer exceptional value for money. They are available in three types of material with different colours.

• Value-Tec white plastic tweezers made from glass fiber reinforced POM (Polyoxymethylene or Polyacetal). High strength plastic with good resistance against wear, abrasion, solvents, and fuels. Choice of 11 models.
• Value-Tec ESD safe black plastic tweezers made from carbon fiber reinforced PPS (Polyphenylenesulfide). Good resistance to acids, alkalis, solvents, abrasion, and temperatures up to 200°C. Choice of 7 models.
• Value-Tec disposable plastic tweezers made from HIPS (High Impact Polystyrene). Single use tweezers with serrated grips and serrated tips to provide excellent grip.

Value-Tec-ESD-safe-plastic-black-white-blue-disposable-tweezers.php

 

EM-Tec Economy TEM grid box for 50 grids
Well-designed compact economy TEM grid box with a capacity of 50 the standard 3.05mm TEM grids. Ideal for transport and storage. Body with the 50 storage cavities is made of blue anti-static ABS with a clear acrylic sliding lid. Positions are referenced with numbers and letters, clearly printed on the body. Wider spacing of the cavities prevent confusion when loading and make retrieval easier. Dimensions of the EM-Tec TGB-50 TEM grid box are: 75 x 36 x 7mm.
EM-Tec-TEM-grid-storage-boxes.php#a28001125B

BEL-1 conductive SEM coating fluid
The BEL-1 conductive ionic SEM coating fluid offers a simple and cost-effective alternative for coating non-conductive sample with a conductive surface layer. Instead of using a sputter coater with a precious metal target, the sample needs to be immersed in a diluted conductive SEM coating solution for several minutes.
Features of the BEL-1 conductive ionic SEM coating fluid are:

• Excellent permeability and high electrical conductivity
• Water-soluble and environmentally friendly coating agent for SEM observation
• Compatible with most non-conductive materials and fixed biological samples
• Based on polythiophene conductive polymer
• Conductivity: 250 S/cm

BEL-1-conductive-ionic-SEM-surface-coating-fluid-solution.php

 

Micro-Tec metallographic embedding clips
The Micro-Tec embedding clips are designed to hold thin samples for cold or hot embedding. The Micro-Tec clips hold the sample vertical and stable during embedding and curing of the resin. Ideal for embedding thin samples and cross sectioning. To be used with samples like printed circuit boards, Si chips, foils, sheets, thin batteries, paper, etc. Available as stainless steel coil clips, PET coil clips,  plastic T-clips and plastic multi S-clips
Micro-Tec-plastic-stainless-steel-spring-coil-metallographic-embedding-clips.php

 

Micro-Tec metallographic silicone embedding cups

The Micro-Tec blue silicone embedding cups are used for metallographic embedding with cold embedding resins. The multi-use Micro-Tec blue silicone does not adhere to embedding resins and does not require a releasing agent. This is ideal for porous samples to avoid contamination with mold release. The flexible silicone cups allow for easy removal of the hardened mounts. Available for Ø25, Ø30, Ø40 and 50 x 70mm rectangular embeddings.

 

Micro-Tec MET-C conductive hot embedding powder
Micro-Tec MET-C is a graphite filled conductive thermosetting phenolic compression mounting resin. The low electrical resistance of this hot embedding resin makes it ideally suited for embedding sample used for SEM/EDS/WDS applications. For SEM/EDS applications there is no need to coat embedded conductive samples with a conductive gold or carbon coating which improves the accuracy of quantitative X-ray analysis and saves time. Ideally suited for studies at the edge of the sample. Micro-Tec MET-C comes in ready mixed powder form, is black in colour and includes mineral particles to improve edge retention. The conductivity is provided by graphite powder. Micro-Tec MET-C is to be used in a hot embedding press.
Micro-Tec-MET-C-conductive-thermosetting-hot-black-phenolic-embedding-powder-resin.php

 

EM-Tec C32 water based conductive graphene paint, no VOC

EM-Tec C32 is a novel, water based conductive graphene paint with fine dispersed graphene sheets (~1-5μm). The EM-Tec C32 graphene carbon paint is free off any hydro-carbon based solvents and is fully compatible with high vacuum (HV) systems and even UHV systems when dry. Due to its low viscosity, cracks and small gaps are easily filled. EM-Tec C32 shows high conductivity when dry. Ideal for mounting SEM specimens and making grounding paths. Samples can be easily removed afterwards due to its low mechanical strength. Excellent bonding properties on a wide variety of sample materials such as metals, rocks, concrete, ceramics, epoxies, plastics, wood and textiles. Supplied in a 30cc glass bottle with 25g contents and a cap with brush.
EM-Tec-conductive-paints-pastes-and-cements.php#a15001132B

Hysol 1C Vacuum compatible Epoxy

Hysol 1C high vacuum epoxy glue and sealant is ideal for sealing leaks on vacuum systems, bonding vacuum components, repair of vacuum components and to seal electrical feedthroughs on high vacuum systems. Hysol 1C epoxy sealant is fully equivalent to Torr Seal sealant. It is a two- component epoxy resin system with no solvents. Due to the low outgassing rates of the cured epoxy it can be used in high vacuum systems at 10-9 mbar or below.  Hysol 1C epoxy resin provides excellent bonding on metals, ceramics, glass and most plastics. Cured Hysol 1C can be machined, sanded and polished.
Loctite-Hysol-1C-Torr-Seal-High-Vacuum-Epoxy-Resin-Sealant.php

 

EM-Tec TEMTG4C grid holders in copper

The EM-Tec TG4C pin stub based TEM grid holder for up to four TEM grids, machined from solid copper. Ideal when analyzing samples on copper TEM grids.
EM-Tec-TEM-grid-holders-and-STEM-imaging-holders.php?#a12002279B

 

EM-Tec TEM grid holders for Hitachi and JEOL SEMs

The EM-Tec TG4 pin stub based TEM grid holder including stub adapters for Hitachi (M4) and JEOL SEMs (Ø12.2mm and Ø25mm stubs).
EM-Tec-TEM-grid-holders-and-STEM-imaging-holders.php?#a12000379B

 

EM-Tec metal wires for vacuum evaporation

The EM-Tec high purity wires are especially selected for vacuum coating of EM samples. The wires can be easily cut to size and used in evaporation coils, boats or filaments. The small amount of material and the relatively large contact area with the evaporation sources enables evaporation with low power evaporation power supplies.
For shadowing applications used with TEM samples, the thin metal wire could be wound around the end of the carbon rods to simultaneously evaporate metal and carbon. Due to the high melting temperature, the tungsten wires can also be used to make evaporation filaments to evaporate small amounts of other metals.
EM-Tec-metal-wires-and-materials-for-vacuum-evaporation-deposition-coating-TEM.php

Value-Tec Reversed Tweezers with Ceramic Tips

 

3 Styles es of Value-Tec ceramic tips reversed tweezers have been added: 1X, 1BX and 7X. The material used for the ZTA ceramic tips is a zirconia toughened alumina (ZTA). This is the material of choice for high temperature applications. The ceramic ZTA tips combine high wear resistance, high hardness and high temperature stability (1400°C) with good chemical stability. The hard surface makes the tips highly wear resistant.
Value-Tec-high-temperature-ceramic-tips-tweezers.php#a50X14510B

EM-Tec R5 top reference holder for two Ø50mm / 2” mounts

The EM-Tec R5 top reference holder consist of two parts: top and base. The maximum sample height is 26mm. The mounts are secured with screws and can be pushed up with screws in the base. If reduced height metallographic mounts or thin samples are used, Ø32mm spacer discs can be used to ensure that the mounts are pushed against the reference lips. Pushing from the base allows for small angle adjustment if the polished surfaces of mounts are not perfectly perpendicular to the sides. The EM-Tec R5 top reference holder includes two positions for calibration standards mounted on
a standard 12.7mm pin stub. The EM-Tec R5 holder can also be used without the base on the EM-Tec stage adapters with an M4 screw.
EM-Tec-R4-reference-holder-for-four-metallographic-mounts-embeddings.php#a12003356B

EM-Tec R7 top reference holder for 49x89mm metallographic mounts

The EM-Tec R7 top reference holder consist of two parts: top and base. The maximum sample height is 26mm. The mounts are secured with screws and can be pushed up with screws in the base. Pushing from the base allows for small angle adjustment if the polished surfaces of mounts are not perfectly perpendicular to the sides.
EM-Tec-R4-reference-holder-for-four-metallographic-mounts-embeddings.php#a12003357B

 

Replacement screws and parts for the EM-Tec sample holders

Replacement assortment sets for the small screws used in the EM-Tec SEM sample holders and EM-Tec stage adapters. Brass screws are made available for replacement of the stainless-steel screws to avoid any magnetic interference close to the SEM polepiece. The EM-Tec assortment sets are available in M1.6, M2, M2.5, M3 and M4. The sets of replacement screws are packed in compact sorting boxes. Also listed on this page are replacement springs, clips and O-rings used in several EM-Tec holders. The replacement screws and parts for the EM-Tec sample holders, EM-Tec stage adapters and EM-Storr Vacuum container include:

• assortment sets of small screws in stainless steel
• assortment sets of small screws in brass
• replacement springs for the EM-Tec spring-loaded holders and EM-Tec wafer holders
• replacement clips for the EM-Tec S-Clip holders
• replacement clips for the EM-Tec t-EBSD holders
• replacement clips for the EM-Tec wafer holders
• replacement conductive O-rings for the EM-Tec C-Square holders
• replacement O-rings and glass lids for the EM-Tec EM-Storr vacuum containers

Replacement-parts-screws-spring-clips-O-rings-for-EM-Tec-sample-holders-stage-adapter-stainless-steel-brass-copper.php

EM-Tec multiple metallographic mount holders

The EM-Tec multiple metallographic mount holders are designed to hold multiple metallographic, petrographic and ceramographic mounts in a single holder. They are equally useful holding multiple round SEM sample stubs with a size similar to the mounts or for holding larger cylindrical specimen stubs. The EM-Tec multiple metallographic mount holders are available for standard metallurgical mounts with metric sizes of 25, 30, 40 and 50mm diameter and SAE sizes of 1”, 1’1/4”, 1-1/2” and 2” diameter.
EM-Tec-multiple-metallographic-mount-holders.php


EM-Tec Versa-Plate UV1 universal clamping kit
The EM-Tec Versa-Plate UV1 Universal clamping kit has been designed to hold samples which are difficult to hold with the standard brackets. The EM-Tec UV1 Universal clamping kit is ideal for thin plates, thick samples up to 66mm and heavy samples. Materials used for the UV1 clamping kit are aluminium, stainless steel and brass. The EM-Tec UV1 Universal clamping kit contains:

• long and short aluminium clamping strips
• EM-Tec SC4 brass knurled nuts
• set of stainless steel M4 screws, nuts and washers

EM-Tec-Versa-Plate-adaptable-SEM-holders-with-multi-location-plate-and-brackets.php#a12003395B

EM-Tec VS8 mini spring-loaded vise holder for up to 8mm samples

EM-Tec VS8 is a mini single action spring-loaded vise for samples with a maximum clamping size of 8mm. The vise is opened by pulling the moving vise jaw. Ideal for quickly loading thin cross-sections. The vase base dimensions are Ø25 x 12.5mm height. Made from vacuum grade aluminium with stainless steel rods and springs.
EM-Tec-spring-loaded-vise-type-compact-and-universal-SEM-sample-holders.php#a12003228B

EM-Tec HV5 mini vise sample clamp

EM-Tec HV5 mini sample vise clamp for sample thickness from 0-5mm. The sample is held vertically between the vise jaws. The vise jaws are tightened by a brass thumb screw. Holder size is Ø12.2x17mm. Ideal to clamp thin sample.
EM-Tec-gripping-stub-and-stub-based-vise-holders.php#a12003209B

EM-Tec sputter targets on target holder for Emscope SC500 / SC500A

58mm diameter sputter targets bonded on the target holder for the Emscope / Bio-Rad / Thermo VG sputter coaters SC500 and SC500A. Available sputter materials are:  gold, silver, palladium, platinum and gold/palladium alloy.

EM-Tec-Sputter-Targets-for-Sputter-Coaters.php#a7058SUBSB

EM-Tec vacuum hose adapters with KF25 and KF16 flanges

EM-Tec hose adapters with KF25 and KF16 flanges, made from vacuum grade AISI 304 stainless steel to be used with steel wire reinforced plastic vacuum hoses
EM-Tec-KF-NW-vacuum-connection-hardware-parts-components.php#a61110020B

 

Double edge Feather razor blades

Two types of the thin and extremely sharp Feather razor blades are available:

• Feather FA-10 carbon steel razor blades with 0.1mm thickness and extremely sharp cutting edge.
• Feather 81-S Platinum coated stainless steel razor blades with 0.1mm thickness and high corrosion resistance

Double-edge-razor-cutting-blades.php

 

Technical grade T-S carbon rods with 6.15mm diameter

For less demanding and standard SEM-EDS applications, the F-S grade is also available in a technical grade T-S with a lower purity and lower cost. The technical grade T-S graphite rods can contain impurities up to 50ppm. Typical impurities with their maximum levels can be: Si 2-5ppm, Ca 20ppm, Ti 8-10ppm, V 4ppm, Cr 10ppm and Fe 20ppm- not to exceed 50ppm total. The mechanical properties of the T-S grade are identical to the F-S grade.
Carbon-rods-for-carbon-evaporation.php#a70CC0607B

Micro-Tec scalpel blades and handles

The sturdy Micro-Tec scalpel blade handles are made from corrosion resistant and easy to clean AISI 410 stainless steel; available in sizes No.3 and No.4. Ergonomically shaped with a serrated area for improved grip.
The premier quality Micro-Tec surgical scalpel blades are made from a high-quality carbon steel.  Available sizes are the popular smaller blades #10, #11, #12 and #15 and the larger blades #21 and #23. The scalpel blades are sterilised with gamma-radiation and individually packed, supplied in packs of 10 or boxes of 100. Ideal for microscopy preparation, education and cutting applications.
Micro-Tec-scalpel-blades-and-scalpel-blade-handles.php

Replacement diamond tips for Value-Tec diamond scribers

Replacement diamond tips with 60° and 90° tip angle.
Diamond-tipped-and-tungsten-carbide-tipped-scribers-engravers.php#a52002013B

EM-Tec S3 acrylic Eyelash manipulator set

The EM-Tec S3 acrylic Eyelash manipulator set contains 3 Eyelash manipulators with a length of 6, 10 and 13mm with a colour-coded handle. The length of the handle is 165mm. Resistant to acetone, dichloroethane and trichloroethane-chloroform.
EM-Tec-straight-acrylic-eyelash-manipulator-set.php#a52005203B

EM-Tec C30 water based conductive carbon paint in 100 gram bottle, no VOC

M-Tec C30 is a premium, water based conductive carbon paint with fine dispersed graphite flakes (~3μm). The EM-Tec C30 carbon paint does not contain any hydro-carbon based solvents and is fully compatible with high vacuum (HV) systems and even UHV systems when dry. Due to its low viscosity, cracks and small gaps are easily filled. EM-Tec C30 shows good conductivity when dry. Ideal for mounting SEM specimens and making grounding paths. Samples can be easily removed afterwards due to its low mechanical strength. Good bonding properties on a wide variety of sample materials such as metals, rocks, concrete, ceramics, epoxies, wood and textiles. Other applications are lubrication on moving surfaces and shielding. EM-Tec C30 contains approx. 20% graphite in the solution.  Supplied in a 100cc PET bottle with 100g contents
EM-Tec-conductive-paints-pastes-and-cements.php#a15001131B

Micro-Tec M5B microscope slide mailer for 5 slides, black

Now also available in black polyethylene; the Micro-Tec M5B microscope slide mailer for 5 slides. Micro-Tec-microscope-slide-storage-boxes.php#a51003007B


Micro-Tec M1 single microscope slide mailer

Micro-Tec M1 single microscope mailer for 75x25mm microscope slides. Made from natural PE.
Micro-Tec-microscope-slide-storage-boxes.php#a51003001B

Micro-Tec MA86  large format optical lens paper 150x200mm

Large format Micro-Tec MA86 optical lens paper booklets with sheet size 150x200mm are now available. Sold in packs with 300 sheets and 600 sheets.
Micro-Tec-optical-lens-paper-tissue-cleaning.php#a53001018B

EM-Tec Save-Storr containers with 7.1 and 10.5 ltr storage capacity

Two new larger EM-Tec Save-Storr containers have been added:

• EM-Tec Save-Storr 7 made from thick-walled black ABS with a volume of 7.1 ltr
• EM-Tec Save-Storr 10 made from thick-walled black ABS with a volume of 10.5 lt

EM-Tec-Save-Storr-inert-gas-protect-sample-storage-container.php#a13001075B

EM-Tec S3mm embedding tubes for TEM sample preparation

The EM-Tec Ø3mm embeddings tube for TEM sample preparation are useful when making cross sections of materials for examining in the TEM. The 3mm outer diameter is compatible with the TEM sample holder; the 2mm inside diameter leaves enough space to embed the sample(s). Available in titanium, brass, copper and AISI 304 stainless steel.
EM-Tec-3-mm-embedding-tubes-for-TEM-sample-preparation.php

K-Kit wet cell liquid TEM sample holder chamber

The K-kit is an easy to use innovative sample holder for liquid specimens. It is a single-use sample holder with a sealable micro-channel between two silicon nitride membranes. The K-kit is made from silicon with Si3N4 membranes, using the latest MEMS technologies. Included with the K-kit is a copper aperture grid to mount the sealed wet cell. The k-kit is compatible with most standard TEM holders.

The microchannel, with two rectangular silicon nitride windows, enables imaging and analysis of nano-particles suspended in aqueous solutions. The size of the silicon nitride window is 300µm x 25µm with channel heights of 0.2 and 2µm. The inside of the microchannel is coated with Si3N4. Applications are wide ranging from, material, life, chemical and biological sciences.  Nanoparticles can be imaged in their native state or in-situ dynamic physical and/or chemical reactions can be observed. The K-kit can also be used in dry mode. The suspended particles are dried in the K-kit microchannel to avoid agglomeration which tends to occur when droplets of suspensions are dried on a support film. Compatible with FESEM – STEM detectors. The K-kits with the 30nm Si3N4 membranes are compatible with FESEM s equipped with a STEM detector when 25 – 30kV is used for imaging. The best results are achieved in dry mode.
K-kit-wet-cell-liquid-TEM-sample-holder-with-preparation-tools.php

EBSD-3D sample holder for FEI / Thermo DualBeam SEM-FIB systems

The EBSD-3D sample holder for FEI / Thermo DualBeam FESEM/FIB systems permits FIB milling of the sample and subsequent acquisition of EBSD data. Repeatedly rotating the sample 180 between the milling and the EBSD mapping positions enables collecting 3D EBSD mapping data. This holder is to be used with the FEI EBS3 software and FEI / Thermo DualBeam systems. 
The EBSD-3D holder can be used to analyse either the surface or a cross-section of a sample. The angles on the EBSD-3D sample holder are 54° (short facet) and 36°  (long facet).  The sample holder is mounted in the centre of the sample stage with M6 fine thread. The sample stage should be set at 16° tilt.
EBSD-3D-sample-holder-for-FEI-Thermo-dualbeam-SEM-FIB-systems.php

Micro-Tec ESD safe sticky cleaning swabs

The Micro-Tec sticky cleaning swabs are especially designed to remove particles from surfaces. The anti-static treatment of the plastic handles dissipates electrostatic charges, making them suitable for cleaning electrostatic sensitive components. The tip of the Micro-Tec sticky cleaning swabs is coated with a soft absorbent gel which picks up particles. With the sticky cleaning swab you can remove contaminating particles, not displacing them and not causing cross contamination. Applications are removing particles, lint, debris from hard or difficult to reach areas, cleaning optical devices, removing particles from surfaces, cleaning components and removing contamination particles. The Micro-Tec sticky cleaning swabs are available in three sizes (Ø1mm, 
Ø2mm and Ø3mm heads) and are sold ready-to-use in boxes of 10 and 25.
Micro-Tec-sticky-cleaning-swabs.php

Stronger Polyimide tapes with 0.08mm and 0.12mm thickness

The Polyimide (Kapton) tapes are now available with 0.08 and 0.12mm thickness. Available in widths of 5 to 50mm with a tape length of 33m. Clean 76mm diameter plastic core.
Kapton-polyimide-tapes.php#a71004100B


Low static single sided Polyimide (Kapton) tape

The low static single sided Polyimide (Kapton) has been designed for use in ESD sensitive applications. Unwinding conventional polyimide tapes can generate static electricity.  The selfwound low static polyimide (Kapton) tape comprises similar specifications as the single sided polyimide tape combined with extremely low electrostatic discharge properties. The tape has been threated to greatly reduce electrostatic discharge. Available in widths of 5 to 50mm with a tape length of 33m. Clean 76mm diameter plastic core.
Kapton-polyimide-tapes.php#a71009100B

 

Micro-Tec Tablet Press and Tablet Punch Die Kit

Determining the chemical composition of a fine powder with SEM/EDS can be sometimes difficult. Pressing the fine powder into a tablet (if needed with a bonding compound) simplifies handling. By providing a flat surface, the overall analytical results can be improved There are two tablet presses available:
1 - Micro-Tec MTB manual tablet press for Ø3, 6 and 8mm tablets. Manual press with integrated tablet mold, punch and die. Overall size is 185 x 120 x 210mm with a handle length of 195mm.
2 - Micro-Tec TPD tablet punch die kit for Ø6, 9 and 12mm tablets. A hammer or separate press is needed to form the tablets.  Consists of 4 pieces.
Micro-Tec-tablet-press-and-tablet-die-punch-mold.php

EM-Tec high purity sputter targets for Emitech / EMS K500 / 550 / K650 sputter coaters

EM-Tec high purity sputter targets on an aluminium disc substrate, compatible with Emitech /EMS K500/550/650 sputter coaters. Available target materials are Au, Au/Pd, Pd, Pt and Ag.
EM-Tec-Sputter-Targets-for-Sputter-Coaters.php#a7060SUBSB

 

EM-Tec RXS-36MC metals/compound standard

The EM-Tec RXS-36MC materials reference standard includes 36 reference metals/ compound standards and a 200µm aperture copper Faraday cup. All mounted in a Ø25.4 x 9 mm AISI 303 stainless steel disc. Intended as reference standard for quantitative EDS and WDS micro-analysis applications.
EM-Tec-CXS-calibration-and-reference-standards-for-EDS-WDS-and-BSD.php?#a36000638B

 

EM-Tec RXS -40M+CL mineral + cathode luminescence reference standard

The EM-Tec RXS-40MC+CL minerals reference standard includes 40 reference minerals and a 200µm aperture copper Faraday cup. EDS spectra, cathode luminescence spectra and quantitative EDS analysis results are provided for each mineral. All minerals are mounted in a Ø25.4 pin stub, made from AISI 303 stainless steel. All minerals are embedded in conductive silver filled epoxy. The stoichiometric compositions of these natural minerals are nominal.  Intended as reference standard for CL set-up and test, quantitative EDS and WDS micro-analysis applications. 200µm copper Faraday cup and 40 minerals.
EM-Tec-CXS-calibration-and-reference-standards-for-EDS-WDS-and-BSD.php?#a36000644B

 

EM-Tec single sided conductive copper SEM tapes in 25 and 50mm width

The EM-Tec single sided conductive copper SEM tapes are now also available in 25 and 50mm width.
EM-Tec-conductive-copper-SEM-tapes.php#a15000125B

Micro-Tec single edge cutting blades

The high quality Micro-Tec single edge cutting blades are made from a select surgical grade carbon tool steel. The hardened C1095 carbon steel cutting blades are precisely ground for superior sharpness and excellent cutting quality. The single edge cutting blades include a back for safe handling. The cutting blades are individually wrapped for protection, except the ones in the clear dispenser box.
Micro-Tec-single-edge-cutting-blades.php

 

Micro-Tec borosilicate glass petri dishes

Micro-Tec borosilicate glass petri dishes for sample preparation and microscopy applications. Made from chemically resistant, low expansion, heat resistant and highly transparent borosilicate glass. Ideal for sample preparation, mixing of small volumes, melting of wax, sorting and sifting. Micro-Tec borosilicate glass is also known under the brand names Pyrex and Duran. The Micro-Tec borosilicate petri dishes are available in three sizes: 60, 75 and 90mm diameter complete with lid.
Borosilicate-Glass-Petri-Dishes.php

 

Cobalt, Indium, Tin and Zinc Sputter targets

The selection of the ø54 and ø57mm diameter sputter targets has been expanded with Cobalt, Indium, Tin and Zinc sputter targets.
EM-Tec-Sputter-Targets-for-Sputter-Coaters.php#a7057DISKB

82mm Annular Targets now also with 0.2mm thickness

The ø82 x ø60mm precious metal annular targets are now available with 0.2mm target thickness for increased target life and reduced overall costs.
EM-Tec-Sputter-Targets-for-Sputter-Coaters.php#AnnularTargets

 

High purity graphite plates

Graphite plates are useful for larger specimen support or if the sample needs to be shielded
against X-ray or backscattered electron signals originating from the SEM stage. The surface
finish for the graphite plate is less fine as for the graphite planchets; the plates are cut from thicker plates to reduce thickness and weight. Made from high purity graphite material, they are available in sizes 50 x 50 x 1mm, 70 x 80 x 1.2mm, 100 x 50 x 2mm and 100 x 100 x2mm. For increased mechanical stability, the graphite plates can be mounted metal substrates. The graphite plates are sold in pkg/5.
Vitreous-Carbon-Discs-and-Graphite-Planchets.php#a10008250B

PIKAL Care and PIKAL Liquid metal polish

The professional PIKAL metal polish paste is now supplemented by PIKAL CARE metal polish and PIKAL Liquid metal polish.
Metal-and-glass-polish-compounds.php#a53000260B

 

Krytox GPL 206 PFPE / PTFE grease

Krytox GPL 206 is a long-lasting, nonreactive, nonflammable grease, safe in chemical and oxygen service. It only contains carbon, oxygen and fluorine, but no hydrogen or silicone. This PFPE/PTFE grease doesn’t degrade in contact with air. It is an ideal grease for vacuum load locks, vacuum door seals, O-rings, moving aperture holders and valves found on electron microscopes and laboratory vacuum equipment. Available in 60 gram tubes.
Krytox-GPL-207-PFPE-PTFE-vacuum-grease.php#a64002060B

EM-Tec GB-4L clear lid for the EM-Tec CGB4 cryo grid box

Replacement clear lids for the EM-Tec CGB4 cryo grid box.
EM-Tec-TEM-grid-storage-boxes.php#a28001005B

EM-Tec ESD safe epoxy coated precision electronic Tweezers

The EM-Tec ESD safe epoxy coated anti-magnetic electronic tweezers are Swiss made, precision engineered high quality tweezers which offer enhanced operator comfort. They are made from a special, low carbon, high strength stainless steel with the grips coated with an ESD safe black polyester epoxy. The resistivity of the epoxy coating is 10E-5 to 10E-6 Ohm. The black epoxy coating results in an impact resistant surface with good elasticity and improves operator comfort. Good resistance to many diluted acids and alkalis.
EM-Tec-ESD-safe-epoxy-coated-anti-magnetic-precision-electronic-tweezers.php

 

Micro-Tec anti-static, black Wafer carrier trays; 1- 6”/ 25 - 150mm

The Micro-Tec ESD-safe, black wafer carrier trays are specifically designed to ship, transport or store semiconductor wafers. Primarily designed to hold thin silicon wafers, but are equally suitable for glass, quartz, sapphire, GaAs and other thin round wafers in sizes from Ø1” to 6” or Ø25 to 150mm.
Micro-Tec-wafer-carrier-trays.php

 

Micro-Tec Ø4”/ 100mm <P100> silicon wafer

silicon wafer" width="60" height="50" align="right" />The Micro-Tec <P/100> silicon wafer substrates can be used for sample substrates, micro-fabrication, substrate for thin film research or biological substrates. Useful flat substrate for SEM imaging of particles due to the low background. For biological applications, Si has similar properties as glass and can be used to mount or grow cells. Can be easily cleaved or used as a whole wafer. The Micro-Tec Si wafers are packed in a wafer carrier trays for protection.
Silicon-wafers-substrates-and-sample-supports.php#a10008140B

 

EM-Tec W2 and W3 SEM wafer holders for 2”and 3” wafers

The range of the EM-Tec SEM wafer holders with the unique locking slide has been expanded with wafer holders for 2” (51mm) and 3” (76mm) wafers.
EM-Tec-wafer-holders-for-SEM.php#a12000282B

 

Micro-Tec optical lens tissue

Premium quality Micro-Tec optical lens paper tissue for optical instruments cleaning and EM laboratory applications. Carefully made from new stock to achieve a soft and safe tissue free of mineral and vegetable filler. Lint-free, acid-free, soft but strong tissue which can be used either dry or wet.  Useful for many applications to protect and clean sensitive surfaces. The Micro-Tec optical lens tissue can be used to replace the Ross lens tissue, which is no longer available. Available in sheets with a size of 100x 150mm (4”x 5”), supplied in booklets with 50 sheets. Sold in packs of 6 booklets with a total of 300 sheets and packs of 30 booklets with a total of 1500 sheets.
Micro-Tec-optical-lens-paper-tissue-cleaning.php

 

Ø54mm high purity Tungsten, Tantalum, Niobium & Molybdenum Sputter Targets

The selection of Ø54mm high purity sputter targets has been expanded with Tungsten, Tantalum, Niobium and Molybdenum sputter targets. Compatible with Leica, Bal-Tec, Emitech and Safematic sputter coaters.
EM-Tec-Sputter-Targets-for-Sputter-Coaters.php#a7054DISKB